amp gain settings

Home / the12volt's Install Bay / Car Audio / amp gain settings (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Ski76

Member - Posts: 3

Joined: July 15, 2002

Location: United States

Posted: August 19, 2002 at 9:50 AM / IP Logged

I have a US Acoustics 800D subwoofer amp driving two MTX 10" subs at 4 Ohm. The input level settings on the amp range from 100mv to 6v. My Clarion head unit is supposed to put out a 4V signal. I am having a bit of trouble getting the amp input set correctly. No matter where I set the gain on the amp I cannot hear any difference in output. This particular amp has a remote bass level controller and the head unit also has a subwoofer colume control, if this matters.

Any advice would be greatly appreciated.

Thanks amp gain settings - Last Post -- posted image.

Steve...

JellyNutz

Copper - Posts: 85

Joined: August 18, 2002

Location: United States

Posted: August 20, 2002 at 8:53 PM / IP Logged

Sounds like the gain pot on the amp is broke. Swap it for a new one.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

amp gain settings

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.