door lock problems

Home / the12volt's Install Bay / Car Security and Convenience / door lock problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

knappy

Member - Posts: 1

Joined: January 01, 2004

Location: United States

Posted: March 25, 2004 at 8:03 PM / IP Logged

i recently made a mistake...one i shoulda known better on. Anyways, I have a 1998 Ford Mustang 3.8 convertible and I ripped out the stock alarm and was installing a DEI 800 alarm. I thought I could just send the pulses (blue/green) on the lock and unlock wire like a 3 wire system. KICKING MYSELF NOW, i remember its a 5 wire setup. DUH!

Anyways, to make a long story short...I took the alarm out, sent it back to DEI for repair. My car's door locks now only work on the lock function. They dont unlock. And its all wired back to stock. No stock alarm. I see 12 volts at the switch and the switch is sending...

Any Ideas? please email me at knappoleon_2000@yahoo.com if you know whats goin on.

THANKS FELLAS!!!!

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: March 26, 2004 at 2:41 PM / IP Logged

Did you install your old factory alarm back in?

Did the car have a keyles entry on it from the factory, if so then you have a postive system and not a rev pol.

and if you have no keyless then double check your wires

Power Lock:		PINK / YELLOW	# PIN BLACK CONNECTOR *****
Power Unlock:		PINK/LT GREEN	HIGH IN DRIVER OR PASS. KICK PANEL

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

door lock problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.