Valet Switch Problem, help!!!

Home / the12volt's Install Bay / Car Security and Convenience / Valet Switch Problem, help!!! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tadziu2001

Member - Posts: 8

Joined: April 13, 2004

Location: United States

Posted: April 14, 2004 at 10:12 PM / IP Logged

Hello,

I have a question about a problem i am having with my alarm. It is a Mega-3600 . Anyways, i have it partially hooked up, but when i try to get into the programing, like turn the key on and off 3 times, then hit the valet switch ### of times & hold it down, then the alarm should chirp back a # of chirps confirming that i entered the mode... But instead of that it chirps once and pages my remote. I am totally lost and dont know what to do next. I dont know where to start... Thank you!!!!

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: April 14, 2004 at 10:16 PM / IP Logged

What I would do is re-read your programming instructions.. Just sit there and actually think about whats going on. Hope that helps.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

desh187

Copper - Posts: 310

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 13, 2002

Location: Canada

Posted: April 15, 2004 at 12:14 AM / IP Logged

usually i put the system in valet mode for a few seconds and then out of valet.

after that try programming your remotes if they are not programmed and turning the ignition on and off should also be done quickly eg ignition on is two clicks up from off position and off is just 1 click back.

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: April 15, 2004 at 12:30 AM / IP Logged

Also, make sure your ignition wire and door trigger are both hooked up already.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Valet Switch Problem, help!!!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.