the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 kia sportage unlock/lock wires


Post ReplyPost New Topic
< Prev Topic Next Topic >
Escalade_on20z 
Member - Posts: 24
Member spacespace
Joined: April 02, 2002
Location: United States
Posted: September 01, 2002 at 11:01 AM / IP Logged  

Does anyone have the wiring codes for a 2000 kia sportage 4 door? All I really need is the lock and unlock wires and location. Also this car does not have a lock/unlock button it only works when you lift the tab on the top of the door this triggers all for doors to lock or unlock.

thanks

PS. what is the best way to hook up a back- up battery to an alarm?

bberman1 
Gold - Posts: 2,314
Gold spacespace
Joined: March 11, 2002
Location: United States
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: September 01, 2002 at 6:00 PM / IP Logged  
          YEAR: 2000  MAKE: Kia  MODEL: Sportage  STYLE: |       ITEM          |     WIRE COLOR      |POL |       WIRE LOCATION        |
|                 12V |WHITE/ red            | +  |ignition harness *1         |
|             STARTER |BLACK/ red            | +  |ignition harness *1         |
|            IGNITION |BLACK / YELLOW         | +  |ignition harness *1         |
|     SECOND IGNITION |BLACK/ white          | +  |ignition harness *1         |
|           ACCESSORY |blue                 | +  |ignition harness *1         |
|          POWER LOCK |WHITE/ red *2         | -  |drivers door harness        |
|        POWER UNLOCK |RED / green            | -  |drivers door harness        |
|    PARKING LIGHTS + |blue / YELLOW          |    |dash dimmer switch          |
|    PARKING LIGHTS - |                     |    |                            |
|          HEADLIGHTS |                     |    |                            |
|        DOOR TRIGGER |YELLOW /GREEN         | -  |drivers kick panel          |
|    DOME SUPERVISION |same as door trigger |    |                            |
|     TRUNK/HATCH PIN |GREEN/  YELLOW         | -  |at rear dome light          |
|            HOOD PIN |                     |    |                            |
|   FACTORY ALARM ARM |arms on lock         |    |                            |
|FACTORY ALARM DISARM |disarms on unlock    |    |                            |
|    DISARM NO UNLOCK |lt. grn/blk or green | +  |steering column *5          |
|          TACHOMETER |yellow/white         |    |dianostic connector *3      |
|         SPEED SENSE |blue/black           |    |ECM *4                      |
|          BRAKE WIRE |orange               | +  |brake pedal switch          |
|        HORN TRIGGER |                     |    |                            |
|              WIPERS |                     |    |                            |
|   LF WINDOW UP/DOWN |                     |    |                            |
|   RF WINDOW UP/DOWN |                     |    |                            |
|   LR WINDOW UP/DOWN |                     |    |                            |
|   RR WINDOW UP/DOWN |                     |    |                            |NOTES:*1 If equipped with a knee air-bag system, unbolt without disconnecting toaccess wiring.*2 Can also find a blue/black wire in a yellow connector behind the dashdimmer switch or in the door boot and wire as type "F". This wire will not arm and disarm the factory alarm.*3 The dianostic connector is located in the rear of the enginecompartment on the drivers side.*4 ECM passenger floor 17 pin connector, 4 pole setting.*5 This is the key sense wire. The wire will meter 12v when the key isinserted in the ignition cylinder. Powering this wire as a third ignitionduring remote start will disarm the alarm without unlocking the doors.    (c) 1994-2002 Directed Electronics, Inc. All Rights ReservedIMPORTANT: This wiring information is being provided free of charge on an "AS IS" basis, without any representation or warranty.  It is your responsibility to verify any circuit before interfacing with it using a digital multimeter. Directed Electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information.  Proper installation in every case is and remains the responsibility of the installer.  DEI assumes no liability or responsibility resulting from an improper installation, even in reliance upon this information.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer