Clifford RS3.5 Config Commands

Home / the12volt's Install Bay / Car Security and Convenience / Clifford RS3.5 Config Commands (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Bill828

Member - Posts: 12

Joined: June 24, 2004

Location: United States

Posted: June 25, 2004 at 4:30 PM / IP Logged

Yes they should have went through the settings with me but they didn't. I really didn't think about because in the past I have always had the ability to change the settings to what I wanted.The last 2 alrms I had were Viper alarms and I received the installer guide with the alarm so I had the ability to change my settings. Unfortunatey this time the installer left all of the default settings. I went back to have them change the parking light setting for the remote start feature but I didn't think about the run time for remote start. Thanks for all of the input guys.

Bill

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: June 25, 2004 at 4:48 PM / IP Logged

thats simply a miscommunication ... i ALWAYS run thru the programming guide with customers and make sure i know in advance what features they want on or off.... i can certainly see how going back more than once will be a hassle for you, but from their point of view i can see it too.... tell you what i'd do... go back and ask to LOOK AT the guide to see what options are available...select everything you would like changed... and then have them run thru it quickly with a bitwriter...it'll only take 3 minutes if that to reprogram the system that way.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Javelin3o4

Copper - Posts: 239

Joined: August 22, 2003

Location: United States

Posted: June 26, 2004 at 1:52 AM / IP Logged

here is a link to the install guide.

http://www.directechs.com/guides/manuals/ig/clifford/N919564_6-03.pdf

Bill828

Member - Posts: 12

Joined: June 24, 2004

Location: United States

Posted: June 26, 2004 at 9:29 AM / IP Logged

Thanks for the the install guide I really appreciate it.

sixpac440

Member - Posts: 3

Joined: June 22, 2004

Posted: June 26, 2004 at 8:39 PM / IP Logged

This MAY help. It's the link to the installer’s manual for the Viper 791xv. I'm told it is the same as the Clifford 3.5.

It has the information you are looking for but as stated above the Clifford may be locked by the dealers Bit writer and only able to be unlocked with a Bit writer.

Try this. Print it out in case Viper moves it beyond the reach of non-dealers. It was working as of 6-25-04.

http://www.directed.com/guides/manuals/ig/viper/N564V_6-03.pdf

It takes some time to load on my broadband connection so be patient, it will load.

Six

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford RS3.5 Config Commands

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.