Old alarm, new remote start

Home / the12volt's Install Bay / Car Security and Convenience / Old alarm, new remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Rief

Member - Posts: 3

Joined: June 26, 2004

Posted: June 26, 2004 at 5:12 PM / IP Logged

Hi, I have a Python 2000 for a few years. No problems with it except for remote batteries. Anyway, my friend gave me a dei 551t. remote start add-on. Installed just fine, with the exception of the alarm disarm/alarm arm wires. I'm not to exactly sure how to wire these to the 2000hf. Any suggestions? Another thing I had lying around was a dei extended antenna. Does the braid get grounded to the car or to the alarm?

Thanks in advance.

tjdurham

Copper - Posts: 180

Joined: July 25, 2003

Location: United States

Posted: June 26, 2004 at 7:32 PM / IP Logged

if the remote starter isnt setting off your alarm dont worry about those wires as for the antenna cut your current antenna back to 3" from the brain and hook the center to your antenna and solder the braid to your ground

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Old alarm, new remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.