which is better?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / which is better? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Xplorer

Copper - Posts: 69

Joined: June 01, 2004

Location: United States

Posted: June 30, 2004 at 9:36 PM / IP Logged

Hey,

I am about to install a couple of 12's in a sealed enclosure and was wondering how to run my wiring to the 2 subs. I was gonna wire the subs in parallel (4Ohms each <-> 2Ohm load)and wanted to know if i should make a small hole in the back of the box , run the speaker wire , then hot glue gun it so it is air tight OR should i just buy a terminal , install the terminal to the back of the box , and then connect the wire to that. Does it matter which way i do it? Also does it matter what gauge wire i use?

Thanks

Peace

Back to Top

dangerranger96

Copper - Posts: 163

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 05, 2004

Location: United States

Posted: July 01, 2004 at 12:06 AM / IP Logged

use some silicone caulk instead of hot glue it seals better

Back to Top

Search for other posts by dangerranger96

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: July 03, 2004 at 12:35 PM / IP Logged

Spend a buck and get the terminal cup or a nice set of binding posts. Much more professional and reliable.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

which is better?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.