integra with clifford 3.5 alarm

Home / the12volt's Install Bay / Car Security and Convenience / integra with clifford 3.5 alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Lee_Thao

Member - Posts: 16

Joined: November 03, 2004

Location: United States

Posted: November 04, 2004 at 3:02 AM / IP Logged

i was wondering if anyone knows to how install the clifford matrix 3.5 alarm into a 96 acura integra gsr. there are so many wires and i don't know which to connect and which is not needed. I also don't know if i need to wire up the diodes and resistors or not. And one more thing, i know that it's illegal to have a manual transmission to have a autostart but if someone could show me how to install that too it would be appreciated. thanks.

Lee

Ben.c

Member - Posts: 29

Joined: October 30, 2004

Location: Australia

Posted: November 04, 2004 at 3:50 AM / IP Logged

if you go to the left hand side of the web site and look under general information and click on vehicle information you will find a search box just sect the year and make of vehicle from there and selct alarm info for your vehicle.

note its not advisable to hook up remote start to a manual but so you know the wire from your alarm for the nuetral sfaety switch must be grounded or the remote start wont work but i suggets your try to rig up some kind of spring loaded switch on your gear shifter so it only provides ground when in nuetral .( this is hard be can be done )

ozy installer

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: November 04, 2004 at 10:02 AM / IP Logged

actually DEI has a new module out that allows integration into manual vehicles, although i think it's only available in Canada.... pity

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Lee_Thao

Member - Posts: 16

Joined: November 03, 2004

Location: United States

Posted: November 04, 2004 at 12:51 PM / IP Logged

thanks for the help, i see what i can do. in the mean time if anyone else knows a easier process of bypassing manual autostart please let me know.

Lee

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

integra with clifford 3.5 alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.