Tach & Hood Switch Wires

Home / the12volt's Install Bay / Car Security and Convenience / Tach & Hood Switch Wires (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gccm

Member - Posts: 6

Joined: December 22, 2004

Posted: December 23, 2004 at 8:29 PM / IP Logged

I can't seem to locate a firewall gromet accessible for pulling tach and hood switch wires from the remote starter. 2001 Chev Impala. Any ideas on how these wires are nomally pulled through the firewall?

Thanks,

Guy

cruzzer

Member - Posts: 3

Joined: February 24, 2004

Location: United States

Posted: December 24, 2004 at 2:18 AM / IP Logged

You might have to drill you own. Remeber to use a gromet in order to protect your wires.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: December 24, 2004 at 7:55 AM / IP Logged

There is a huge light color groment in the fire wall that has a large harness running through it. Take a knife and cut a slit in the groment and go through there. Its quick easy and will protect the wires.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach & Hood Switch Wires

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.