the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Alpine Alarm Problem?


Post ReplyPost New Topic
< Prev Topic Next Topic >
anothacivic 
Member - Posts: 7
Member spacespace
Joined: May 02, 2004
Location: United States
Posted: February 06, 2005 at 4:58 PM / IP Logged  
I had an Alpine Sec-8028 professionally installed a while back. A few days ago when I went to disarm my alarm my headlights and the unarm beep didn't go off, the minute I opened the door the alarm went off, so I pressed the disarm button and the siren turned off.
So I am sitting in my car wondering whats wrong, I press the arm/disarm button and nothing, I can hear the clicking noise on the brain of the alarm but no illumination no beep.
I opened the door, and once again the alarm went off, and once again I press the unarm/arm button of my remote. It got so annnoying when the alarm went off with me opening the door that I disconnected the harness to the brain so that it would stop.
I went and got the manual for the alarm to see how I can reset up the alarm, when I plug the harness back in the alarm would go off.
Am I screwed? Does anyone know how I can fix this problem without going to an alarm place?? would it be easy to fix, since all the wirings already hooked?    By the way thanks for reading this long post and thanks ahead of time for any suggestions.   
Sexified 
Copper - Posts: 87
Copper spacespace
Joined: October 17, 2004
Location: Canada
Posted: February 06, 2005 at 5:34 PM / IP Logged  
it's in valet.
hit the valet button on the remote or turn the ignition on then hit the valet switch under the dash.
sweet.
anothacivic 
Member - Posts: 7
Member spacespace
Joined: May 02, 2004
Location: United States
Posted: February 06, 2005 at 10:09 PM / IP Logged  
thanks alot sexified for the help. I was messing around with the valet button and for some reason my alarm is working like usual again??? It's kinda wierd, I was following the instructions in how to set up the alarm with the alpine manual but the alarm was not doing what it was suppose to. THen for some odd reason, I press the valet button when the ignition was off and VOILA the alarm started to react with the remote again.
My question now is this. I remember one day when my passenger side headlight wasn't working and at the same time my highbeam indicator was slightly lit, barely noticeable, but I noticed it (this was the same time that I noticed my passenger side headlight was out, as so I thought).
The next day, my headlight was working fine and the highbeam indicator did not have that slight illumination. So I thought all was dandy, but then the alarm didn't work, not it does from pure luck of messing around with the alarm.
What's going on here? I feel as if everything is connected somehow. Is there some electrical problems going on here? How can I pinpoint this problem????? HELP?????

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer