91 Explorer Head Unit Install

Home / the12volt's Install Bay / Car Audio / 91 Explorer Head Unit Install (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

compwc18

Member - Posts: 18

Joined: March 29, 2005

Posted: June 08, 2005 at 11:24 PM / IP Logged

well the problem was the ground... i had lifted up the seat, and checked the ground and the amp powered on right away. I had also couldnt find a spot to ground the wire but I sanded all the metal under the carpet completly and put a washer on it, and it doesnt turn off at all... Also, does anybody know what size the Torx is for the bottom of the seatbelt? LMK asap, thanks.

compwc18

Member - Posts: 18

Joined: March 29, 2005

Posted: June 08, 2005 at 11:25 PM / IP Logged

also, thanks to dwarren for the help on the grounding issue...

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

91 Explorer Head Unit Install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.