Park lights not working, any ideas

Home / the12volt's Install Bay / Car Security and Convenience / Park lights not working, any ideas (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

flord

Member - Posts: 10

Joined: October 19, 2004

Location: Canada

Posted: October 23, 2005 at 12:10 PM / IP Logged

My first install, Ultra Start 4560 in 2001 F250.

Checked and rechecked connections? Parking lights to brown wire at headlight switch.

Truck starts with remote horn honks,Siren chirps, but no park lights?

Thanks Jim

Back to Top

78musicman

Copper - Posts: 78

Joined: August 10, 2005

Location: United States

Posted: October 23, 2005 at 12:15 PM / IP Logged

some park light outputs have POS and NEG jumpers.Did you see if you have the jumper right

colorado tap the rockies

Back to Top

flord

Member - Posts: 10

Joined: October 19, 2004

Location: Canada

Posted: October 23, 2005 at 1:21 PM / IP Logged

Thanks 78musicman, output is POS and is correct. In my manual it says to recheck my blue ignition wire at the 6-pin connector, it is connected to the main ignition wire 0volts in the off and accessory key positions and12V in the ignition and start. I have a selectable output that is not connected, I cant see the need for that. I'll try a second system reset.

Thanks Jim

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: October 23, 2005 at 5:03 PM / IP Logged

Pin# 3 on the six pin harness supplies power to the parking light relay. When you have the unit out from under the dash, push lock or unlock.....does the parking light relay "click".....if not look at the connection of red pin3 on the 6 pin main harness.

Back to Top

flord

Member - Posts: 10

Joined: October 19, 2004

Location: Canada

Posted: October 23, 2005 at 7:35 PM / IP Logged

Thanks KarTuneMan, Pin #3 has 12V power, I also have an inline fuse that hasent come from togetherness. When I push lock or unlock I dont hear a relay click. Gulp...., does any one know if there is a built in fuse in side an Ultra Start 4560?

Thanks Jim

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Park lights not working, any ideas

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.