the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

is this enough power ?


Post ReplyPost New Topic
< Prev Topic Next Topic >
michael38127 
Member - Posts: 19
Member spacespace
Joined: February 10, 2005
Location: United States
Posted: October 25, 2005 at 10:56 PM / IP Logged  
I have three rockford p3's and 1 T8002 i want to know if this is going to be enough power for all three of the subs
stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: October 26, 2005 at 8:16 AM / IP Logged  

You need to loosen up the fingers and type more info in your question.  Box type and size, impedance load on the amp, amp's power output, vehicle....  And do you have this all hooked up yet or is it sitting in the garage waiting for someone to tell you it's okay to install?

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.
michael38127 
Member - Posts: 19
Member spacespace
Joined: February 10, 2005
Location: United States
Posted: October 26, 2005 at 8:17 PM / IP Logged  
15 inch
TypeWoofer
Voice coilConfiguration - Dual
Material - Aluminum
Description - 2.5"
Cone MaterialPoly/Plastic -
Parabolic Injection Molded Polypropylene
Frame MaterialFrame - Cast
Material - Aluminum
Surround Material 
Spider 
Crossover 
SpecificationsPower handling(RMS) - 500 Watts
Power handling(Peak) - 1000 Watts
Impedance - 2 Ohms
Sensitivity - 88 db
Vas - 145
Fs - 22
Qts - .489
Xmax - 12.0
DimensionsDepth Bottom mount - 7.7 in.
Cutout - 13.79 in.
Displacement - 184.90 cu in.
Magnet weight - 102 oz.
EnclosureRecommended Sealed (Cubic Feet) - 2.0
Recommended Ported (Cubic feet) - 2.50 @ 33Hz

2
Per channel power
is this enough power ? - Last Post -- posted image.
CEA-2006 compliant
125 W x 2 @ 4 Ohms RMS
250 W x 2 @ 2 Ohms RMS
400 W x 2 @ 1 Ohms RMS
500 W x 1 @ 4 Ohms Bridged RMS
800 W x 1 @ 2 Ohms Bridged RMS
Total power800 Watts
BridgeableYes
CrossoverHP 40-4kHz 24dB per Octave
LP 40-4kHz 24dB per Octave
Subsonic Filter 28Hz
Tone controlsBass Control
0 to 18 dB @ 35-70 Hz
Signal inputLow level -
Quantity - 1
Type - RCA(pr)
Line output1 RCA(pr)
Phase control 
Power inputConnector - Block
Wire gauge - 1/0 AWG
Speaker outputBlock
Power supply topology 
Output topology 
Display 
HeatsinkType -Cast
Cooling -Fan Cooled
Protection 
Remote controlIncluded
Type - Wired
Controls - Bass
ClassA/B
Marine use 
Specifications 
Stereo/Mix mono 
Frequency response20 to 20k Hz +/- .5 dB
Dimensions2.6 X 12.8 X 23 (inches)


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer