need help with install

Home / the12volt's Install Bay / General Discussion / need help with install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Am pM HooDluM

Member - Posts: 16

Joined: April 21, 2002

Posted: May 08, 2002 at 5:41 PM / IP Logged

need help with install with 91 Jeep Cherekee......battery on passenger side...and can't find a way through firewall.....anyone know where i can get through

NyxBass

Silver - Posts: 226

Joined: March 14, 2002

Location: United States

Posted: May 08, 2002 at 6:51 PM / IP Logged

If you really can't find a grommet, you can always drill. Make sure that there is nothing on either side you are drilling. Use a grommet so that the wire won't get cut goign through.

/NyxBass

Static Revenger

Member - Posts: 23

Joined: May 08, 2002

Location: United States

Posted: May 08, 2002 at 8:13 PM / IP Logged

There is a factory grommet or two on the firewall.Saddly though I don't think you will get a very big gauge power wire through it as it's already stuffed with all sorts of factory wiring.

So do as NyxBass suggested and drill you a hole.Use either a drill bit or a uni-bit taking your time as to make sure not to hit any other wires,vacum lines and such obstructions,then grommet it to protect the wire and to seal the hole from any possible moisture.

Search for other posts by Static Revenger

Am pM HooDluM

Member - Posts: 16

Joined: April 21, 2002

Posted: May 09, 2002 at 7:44 AM / IP Logged

thanks guys

Static Revenger

Member - Posts: 23

Joined: May 08, 2002

Location: United States

Posted: May 09, 2002 at 8:33 AM / IP Logged

No problem bro

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help with install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.