viper 791xv+528T in a ford 250 diesel.

Home / the12volt's Install Bay / Car Security and Convenience / viper 791xv+528T in a ford 250 diesel. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Access Card

Member - Posts: 14

Joined: December 06, 2003

Location: United States

Posted: November 16, 2005 at 10:54 PM / IP Logged

Truck is a 2004 Ford 6.0 Diesel.

I got the 791xv installed and now am trying to hook up the 528T pulse timer unit so i can get my remote start to wait for the glo plugs to warm up before starting. Does anyone know how am i suppose to hook this thing up? I know im suppose to use one of the trigger outputs from the alarm but what wires from the 528T go to what and where? thanks for any info.

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: November 17, 2005 at 11:24 AM / IP Logged

So here's what you have to do. On the h2 harness you'll need 2 of those wires. Lt. GREEN/ black - factory alarm disarm and the Gray/black - wait to start. as for the wiring the 528t, this is how it hooks up.

Red - +12volts constant

Black - Ground

Yellow - Ground

Brown - To the H2 Gray/Black wire

BLACK/ White - To the H2 Lt. GREEN/ Black wire

Orange - Not used

Then just adjust the timer for about 30seconds and you're all set.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791xv+528T in a ford 250 diesel.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.