noise when using remote start

Home / the12volt's Install Bay / Car Security and Convenience / noise when using remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Chris Luongo

Platinum - Posts: 3,746

This member consistently provides reliable information

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 01, 2006 at 10:43 PM / IP Logged

Yeah, that's definitely the second ignition wire not being powered up.

On Chrysler vehicles, that wire will start to show power just as you move the key slightly forward from the Lock position---when you see that, it is the right wire.

Back to Top

turboa7m

Member - Posts: 7

Joined: December 18, 2005

Location: United States

Posted: January 01, 2006 at 11:47 PM / IP Logged

you guys were right!!! the 2nd Ing wire is green and red but it is a smaller gauge. I found it and it all works!!! The transmission is happy again. Thanks

Just to let some of you know... I got the locks working... Finaly!! I had to 5 wire the unlock and relay the lock. but it works and I a happy!!

Thanks Again guys

Tim

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

noise when using remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.