the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 cobalt cruise


Post ReplyPost New Topic
< Prev Topic Next Topic >
major grandpa 
Member - Posts: 5
Member spacespace
Joined: January 02, 2006
Location: United States
Posted: January 25, 2006 at 9:49 AM / IP Logged  
How do I identify connector C2 on the BCM? Also the pin configuration. Pin 61 is the input into the cruise control logig module.
Looks like GM is using voltage levels to do the cruise control. When the cruise is turned on, a low voltage is set to indicate cruise is active. When the set or resume buttons are pushed, a higher voltage is momentarily inputted to do that function.
Anyone know what those voltages are?
Major Grandpa
Bast Radiator 
Member - Posts: 1
Member spacespace
Joined: September 08, 2004
Location: Canada
Posted: January 26, 2006 at 4:32 PM / IP Logged  
Has anyone ever used an SCS Frigette cruise system on this Cobalt? They have given me some part numbers but just wondering where the pin location is for the cruise switch adaptor wire harness #208-3904. Does anyone know?
major grandpa 
Member - Posts: 5
Member spacespace
Joined: January 02, 2006
Location: United States
Posted: February 16, 2006 at 10:47 AM / IP Logged  
Mo,
Do you have a picture of the single pin that goes into the factory plug?? My parts guy has all the pins on hand, but can't figure out which one is for pin61 of J2.
Thanks,
Major Grandpa
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, June 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer