rpm connection

Home / the12volt's Install Bay / Car Security and Convenience / rpm connection (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

waxer52

Member - Posts: 11

Joined: January 07, 2006

Location: Ireland

Posted: February 07, 2006 at 1:05 PM / IP Logged

i got a couple of diodes in work today.i'm not sure if they are good enough, they read in4004. anotherquestion is about the connection to the alternator, is it just connect to it the same as any other +wire?

waxer52

Member - Posts: 11

Joined: January 07, 2006

Location: Ireland

Posted: February 07, 2006 at 1:26 PM / IP Logged

it tells me in the manual that i need the alt connection for the autostart/turbotimer (turbotimer is built in). will these diodes be o.k for my hookup to the indicators?

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 07, 2006 at 5:53 PM / IP Logged

use 6 amp diodes the 4 will heat too much.

whats up with the alternator..

is it not a tach connection that you need. all remote starter should be connected to a tach wire that can be got at distributor or injectors..

what exactly does the manual say to connect to word for word

Why oh Why didn't i take the blue pill

Darren Power

dualsport

Silver - Posts: 983

Joined: September 27, 2005

Location: United States

Posted: February 07, 2006 at 8:17 PM / IP Logged

The 4004 diodes you have are only rated for 1A; here are some that are 6A-

6A diodes

waxer52

Member - Posts: 11

Joined: January 07, 2006

Location: Ireland

Posted: February 08, 2006 at 3:10 PM / IP Logged

the manual says that the RED / black wireshould be connected to the alternator and that it should have a voltage of 4.5v. i was talking to an installer today and he said that when you start the car this voltage should drop to 0v.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: February 08, 2006 at 6:58 PM / IP Logged

any alarm i've done needs a tach connection unless it has voltage sensing. the tach connectio can be got as discribed above..

contact louie in besecure 2000 he sells them alarms so he will know if its not standard tach

Why oh Why didn't i take the blue pill

Darren Power

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

rpm connection

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.