the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Viper 560XV Starting Problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
444powerstroke 
Member - Posts: 8
Member spacespace
Joined: February 19, 2006
Location: United States
Posted: February 22, 2006 at 3:13 PM / IP Logged  

I did a self install of a Viper 560XV into a '93 Camry. I finally got everything working (i thought) but the remote start quick cranking the vehicle. It tries, the starter tries but it doesn't start. I reset the tach and it starting working again. I drove the vehicle for a few minutes and the remote start quit working right. not. I reset the tach again and it starting working. Is this a common problem or do I have the "wrong" tach wire. I connected to the black wire at the igniter.

Thanks.

444powerstroke 
Member - Posts: 8
Member spacespace
Joined: February 19, 2006
Location: United States
Posted: February 22, 2006 at 3:43 PM / IP Logged  
OK, now the vehicle is cranking it just won't stay running very long. It stops and restarts again, keeps repeating this cycle.
kohara73 
Copper - Posts: 192
Copper spacespace
Joined: December 08, 2005
Location: Canada
Posted: February 22, 2006 at 4:09 PM / IP Logged  

Directechs website says black wire at coil, so it sounds like you are on the right wire.  When you learned tach, was engine speed normal?  If it learned tach at too high of engine speed, it may not realize that the motor is running.

Keith
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: February 22, 2006 at 5:05 PM / IP Logged  
use tachless mode, very reliable on these model of cars.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
nava94 
Silver - Posts: 296
Silver spacespace
Joined: February 28, 2004
Location: United States
Posted: February 22, 2006 at 9:18 PM / IP Logged  
let us know how it went. recheck your connections.
444powerstroke 
Member - Posts: 8
Member spacespace
Joined: February 19, 2006
Location: United States
Posted: February 23, 2006 at 5:40 PM / IP Logged  
Ok, the default tach setting was off. I moved the jumper to the on position and the remote start works fine. Thanks for the help.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer