Clifford RSX3.5 Alarm Remote

Home / the12volt's Install Bay / Car Security and Convenience / Clifford RSX3.5 Alarm Remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Silverone1

Member - Posts: 24

Joined: October 14, 2003

Location: Michigan, United States

Posted: November 24, 2006 at 8:51 AM / IP Logged

What does the button on the back marked P do and how is it used? I don't have that button on older remotes.

psystems

Member - Posts: 16

Joined: September 14, 2006

Location: United Kingdom

Posted: November 24, 2006 at 9:29 AM / IP Logged

This is the program button for the remote: (you can also enter programming by holding all fiur buttons on the front of the remote)

Page notification - beep or vibrate

press P then lock within 5 secs to choose

LCD illumination - on/off

P then unlock

page mode on/off - will wake up and check car (on) will sleep until you press the a button (off)

P then snow flake (the last button)

Exit Programming stop pressing buttons for min 5 secs

enjoy

Take a look at my problems please under Clifford RSX3.5

Any ideas???

to go or not to lar

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford RSX3.5 Alarm Remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.