How many watts/ohms

Home / the12volt's Install Bay / Car Audio / How many watts/ohms (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dem622

Member - Posts: 17

Joined: January 13, 2003

Location: United States

Posted: January 27, 2003 at 7:28 PM / IP Logged

I have a Kicker KX300.4 4 channel amp that i am planning to run to 4 component/coaxial speakers. I've been looking on the internet, but all i've been able to find are sub configurations. Looking at the sub configs it seems like it would be a 2 ohm load on the amp, is this correct?

Thanks in advance,

Dennis Martin

Back to Top

dem622

Member - Posts: 17

Joined: January 13, 2003

Location: United States

Posted: January 27, 2003 at 7:29 PM / IP Logged

I forgot to mention the speakers would be 4 ohms.

Back to Top

z0ck

Member - Posts: 1

Joined: January 28, 2003

Posted: January 28, 2003 at 11:43 AM / IP Logged

When you are running a set of component speakers, you usually have an external crossover network that goes with them. By the time you wire the whole thing up, you generally get a net impedance of about 4 ohms. Some are a bit more, some are a bit less. Either way, your amp should produce about what its rated for.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How many watts/ohms

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.