the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

95 lincoln town car info


Post ReplyPost New Topic
< Prev Topic Next Topic >
Escalade_on20z 
Member - Posts: 24
Member spacespace
Joined: April 02, 2002
Location: United States
Posted: February 02, 2003 at 10:05 PM / IP Logged  

Can anyone send me some info on the 95 lincoln town car. Is this a difficult install for a remote start with keyless entry. The car has factory anti-thift system and the wiring codes shows doors unlock with pink / YELLOW w/keyless negative and pink/light green W/o keyless reverse polarity.? what does this mean and is the anti-thift system hard to bypass?  

THANKS!!!! 

Player69 
Silver - Posts: 504
Silver spacespace
Joined: October 27, 2002
Posted: February 02, 2003 at 10:22 PM / IP Logged  
The alarm is real easy to bypass.  Its not the easiest car to work on buts its far from the most difficult.  Here is a link for info on the door locks. https://www.the12volt.com/doorlocks/doorlocks.asp
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: February 03, 2003 at 8:56 PM / IP Logged  

The car is fairly straightforward; it's just a little awkward because you often have to get on your back to access the wires coming from the LCM.

The information I have says that the door lock wires are ordinary positive trigger on all models.  Does the car have the entry keypad on the driver's door?  If so, it's going to be positive trigger for sure.

The factory alarm can be armed by remembering to electrically lock the doors while the door is open, and then close it.  You might try setting your remote starter  up so that one of the door trigger wires "sees" a ground while the doors are being locked; this may or may not get the alarm to arm.

Alarm disarm is dark GREEN/ purple at the LCM.  It'll show a ground when you insert the key in the driver's door and twist it to the unlock position.  Your remote starter ought to have a factory disarm output-----it'll put out a ground pulse just before remote starting, and when you press unlock on your keyless entry.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer