Immobilisers

Home / the12volt's Install Bay / Relays / Immobilisers (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

GilesRice

Member - Posts: 1

Joined: February 04, 2003

Location: United Kingdom

Posted: February 04, 2003 at 8:33 AM / IP Logged

Is it possible to use one of the SPDT relays in an immobiliser? My problem is that I know that I have correctly wired in the fuel circuit and ignition and ignition circuit but sometimes the starter motor refuses to catch. Is it a problem with the relay or my wiring? Any suggestions helpful.

Giles

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: February 05, 2003 at 7:52 PM / IP Logged

you will have to be more specific as to what you did.

mpalarm

Member - Posts: 9

Joined: January 05, 2003

Location: Bulgaria

Posted: February 11, 2003 at 11:38 AM / IP Logged

First is necessary to check the starter . This problem looks like problem in the shalter of the starter. In other case check the current handling of the relays in the immo. If it is less than 30 A - use relay with bigger current handling like 30/40A DC , remoted by the immo`s built-in relay for starter interuption.

MPAlarm

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Immobilisers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.