Connecting Aux Monitor to CVA-1005

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Connecting Aux Monitor to CVA-1005 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tmack

Member - Posts: 4

Joined: March 25, 2002

Location: United States

Posted: February 11, 2003 at 1:21 PM / IP Logged

Is there a special way to connect an Alpine TME-M750 to a CVA-1005? Do I just connect the power harness wires from the monitor brain, to the same ones on the CVA-1005 brain? Then just connect the rca's? Whatever insight would be helpful.

Than

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 11, 2003 at 3:43 PM / IP Logged

There really is nothing special to connect another monitor to a cva. All you should have to do is wire the power up, however you want it probably swiched of some sort, and ground it. Then connect the video output from the cva's control box to the input of the monitor.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 11, 2003 at 5:16 PM / IP Logged

If you hook up the TME to the CVA you will only be able to play what is in the video source of the CVA on the TME. If you want it to play a different source on both, you will need a switch box.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Connecting Aux Monitor to CVA-1005

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.