bad led unit?

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / bad led unit? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bluburd

Member - Posts: 19

Joined: February 20, 2006

Location: United States

Posted: August 01, 2007 at 9:23 AM / IP Logged

Hey everyone,

I have a quick question here. I purchased a 60 LED VU meter off of Ebay from a reliable seller. The problem I am having is this:

When I went to install, I used the acc. plug in in my fuse box for the 12v power. I found a suitable ground and hooked the ground wire up to it. However, when I did this, the VU meter did not light at all. I used a circuit tester to make sure my ground and 12v supply were good and it checked out.. All connections to the unit and car looked good.

I wasn't sure my connections were good at first, but when I hooked up the ground I saw a little spark so I know that power is going through the VU meter, right?

Does anyone have any suggestions as to something else I can try? The seller won't email me back and I feel like I got took but really want the VU meter installed.

Thanks for your help!

bluburd

Member - Posts: 19

Joined: February 20, 2006

Location: United States

Posted: August 01, 2007 at 9:25 AM / IP Logged

One more thing - the unit is designed to work between 11.5v and 14v per the seller.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bad led unit?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.