First time trying this......need help

Since its only a keyless, you don't have to worry about making the module hard to access....just put it somewhere that's out of sight, and make sure it's secure so it won't fall down or rattle. I'd imagine you've got it somewhere under the driver's dash. Try not to put it anywhere near the steering linkage or the pedals; it might get in the way and cause an accident. You can use screws to mount the module, but I think zip-tying it to an existing heavy wire harness is much easier. I've seen installers use Velcro or double-stick tape too. I've never heard of the "Executive" brand, so I wouldn't know how to program remotes. And you shouldn't have to unhook the battery. Usually, the programming sequence involves turning the ignition on and off...do you have the ignition wire from the keyless unit hooked up to the car? This is why it has to be hooked up. You might try going right to the unit's module, and without unplugging anything, touch your test lead to where the wires go into the plug....make sure each connections is correct-----is constant power really constant? Is ignition really ignition? Is the programming switch plugged into the right place?

Everything is hooked up right and everything is working.I have already programmed ONE transmitter