the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper 5900, 2006 tacoma


Post ReplyPost New Topic
< Prev Topic Next Topic >
martian337 
Member - Posts: 4
Member spacespace
Joined: March 27, 2007
Location: Namibia
Posted: November 14, 2007 at 2:33 AM / IP Logged  
I'm installing a Viper 5900 in a 2006 Tacoma. I was wondering where the ORANGE accessory output wire on the relay satellite connects to. In the installation guide, it states that I should connect it to "the accessory wire in the vehicle which powers the climate control system". Is this necessary and where exactly is this wire?
Also, since the factory alarm arms and disarms with the lock and unlock, do I connect the Lt.GRN/BLK and GRN/WHT (on the H2 harness) to the same wires I would connect the GRN and BLU (door lock and unlock)?
Thanks in advance!
techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: November 14, 2007 at 7:22 AM / IP Logged  
Battery             WHITE/ RED       (+)     IGNITION SWITCH HARNESS          
Ignition 1     BLACK/ RED     (+)     IGNITION SWITCH HARNESS          
Ignition 2     BLUE / YELLOW     (+)     IGNITION SWITCH HARNESS          
Accessory 1     WHITE/ GREEN     (+)     IGNITION SWITCH HARNESS          
Starter 1     GREEN/ BLACK     (+)     IGNITION SWITCH HARNESS          
Starter 2     BLACK/ WHITE     (+)     IGNITION SWITCH HARNESS          
Anti-Theft Type     UNIVERSAL          
Anti-Theft Descript     KEY SENDS AN RF SIGNAL TO THE BCM THROUGH AN ANTENNA AROUND THE IGNITION CYLINDER          
Key Sense     GREEN/ BLACK     (-)     IGNITION SWITCH HARNESS      (PULSE WITH GROUND DURING REMOTE START WILL DISARM FACTORY ALARM. THE KEYSENCE WIRE, (-) TRIGGER WILL DISARM THE FACTORY ALARM WITHOUT UNLOCKING THE DOORS )       
Tachometer     BLACK/ WHITE     (AC)     AT DATA LINK CONNECTOR UNDER DRIVER DASH PIN 9          
Parking Lights     GREEN          (+)     AT VEHICLE FUSE PANEL       
Brake Lights     BLUE          (+)     AT FUSE BOX 11 PIN PLUG PIN 2       
Horn          GREEN/ RED     (-)     AT FUSE BOX 18 PIN PLUG PIN 10     
Alarm Disarm          DISARMS WITH UNLOCK
Alarm Arm          ARMS WITH LOCK
Power Unlock     GREEN/ BLACK     (-)     DRIVER KICK     (DOUBLE PULSE)     
Power Lock     VIOLET          (-)     DRIVER KICK          
Driver Mtr Unlock     BLUE/BLACK     (REV)     DRIVER KICK          
Driver Mtr Lock          BLUE/RED     (REV)     DRIVER KICK     
Pas Mtr Unlock          BLUE/BLACK     (REV)     PASSENGER KICK
Connect the GREEN and BLUE to the VIOLET and GREEN/ BLACK (door lock and unlock)this will arm and disarm OEM alarm. Connect the factory disarm to the keysense so the alarm will not sound when remote starting. ORANGE accessory output wire on the relay satellite connects to Accessory 1 WHITE/ GREEN. The pink will connect to Ignition 1, the pink with white will connect to Ignition 2. Make sure that the pink and white wire is set as ignition 2. The starter will need two wires energized, the purple wire will go to GREEN/ black and BLACK/ white will be driven by a relay. Wire relay so the start purple thin wire on wire ribbon goes to pin 85 on relay. Wire pin 86 and 87 to a fused 12v+ constant source. Then connect pin 30 to the second start wire. The anti theft will need a bypass module if your key has a transponder in it.
The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.
Do it right the first time... or I might have to fix it for ya
martian337 
Member - Posts: 4
Member spacespace
Joined: March 27, 2007
Location: Namibia
Posted: November 19, 2007 at 9:29 PM / IP Logged  

thanks for the info, i installed the alarm over the weekend without any problems.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer