the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

viper remote start stopped working?


Post ReplyPost New Topic
< Prev Topic Next Topic >
davidas 
Member - Posts: 7
Member spacespace
Joined: December 11, 2007
Posted: December 15, 2007 at 2:16 PM / IP Logged  

Well, I found the wire that will turn on the relay for the PINK ignition output.  It appears the relay for the ignition is bad.    I got the whole relay satellite module pulled out.   I just need to find out which ones are the relay coil terminal so I can put power to it and simulate turning the relay on or off to be sure that is the culprit.

davidas 
Member - Posts: 7
Member spacespace
Joined: December 11, 2007
Posted: December 16, 2007 at 4:47 AM / IP Logged  

Well I can't figured out where to tap power to simulate/operate the relay for testing so I started tapping/hitting the ignition relay thinking it could be sticking or something.  After enough hitting, I rewired everything and started it with the key incase the bypass (555L) needs to re-learn the R-code, then shut it off and tried the remote start.  To my surprised.... it started.  Tried it several times testing the shutdown inputs, valet take-over and the pre programmed run time and everything is working.

I guess the hitting did it...    what to do know...  hitting things when everything else fails actually works. 

I appreciate all your help.

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 11, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer