adding more alarms

Home / the12volt's Install Bay / Car Security and Convenience / adding more alarms (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

natethegreat11

Member - Posts: 30

Joined: June 13, 2007

Location: United States

Posted: December 16, 2007 at 11:03 AM / IP Logged

I've got more than one alarm attached to my Clifford Matrix 10.5 System.

It seems that my sirens don't operate at full capacity because they are all wired to the same Brown Wire (Alarm Output) coming out of my brain unit.

How do I wire more alarms to my system and keep them all fully powered?

Search for other posts by natethegreat11

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: December 16, 2007 at 11:16 AM / IP Logged

With a relay. if the alarms siren output is (+) which i'm sure it is, then this is how. 86 brown wire from alarm. 87 12v, 85 ground, 30 out to sirens.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

adding more alarms

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.