compustar outputs not going to ground

Home / the12volt's Install Bay / Car Security and Convenience / compustar outputs not going to ground (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jamball

Member - Posts: 6

Joined: December 16, 2007

Location: British Columbia, Canada

Posted: December 18, 2007 at 8:45 PM / IP Logged

I have a Compustar Remote starter/alarm and the (-) outputs for Lights, ignition, starter, accessary will not go to ground when the starter is activated. The status output does work and it is from the same plug as the others. Does anyone know what might be causing the rest of the outputs not to go to ground?

Back to Top

evileagletalon

Copper - Posts: 65

Joined: November 17, 2006

Location: United States

Posted: December 18, 2007 at 10:53 PM / IP Logged

bad harness, defective unit, burned outputs, it can be many things. The best thing you should do is return it to the Authorized Dealer that you bought it from.

Back to Top

Search for other posts by evileagletalon

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: December 18, 2007 at 10:54 PM / IP Logged

i'm assuming you've metered these outputs and that the harness seems intact --

all this being said, sounds like a bad brain -- blown transistors

The search function is your friend.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar outputs not going to ground

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.