05 dodge diesel remote start trouble

Home / the12volt's Install Bay / Car Security and Convenience / 05 dodge diesel remote start trouble (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

lionhart7756

Member - Posts: 6

Joined: December 26, 2007

Location: Arizona, United States

Posted: December 27, 2007 at 5:07 PM / IP Logged

05 is electronic injection that started on the 3rd gen in 2004.5 models. as for the tach location it is in the right place and right wire i just believe the setting are incorect. i will have to check the model but it is only about 1 year old. it takes a 3pin connector on the programer.

Back to Top

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: December 27, 2007 at 5:35 PM / IP Logged

its injected by a piezeoelectric injector, but it is direct mechanical injection on all 5.9 and 6.7l cummins diesel motors. there is no physical injector wiring.

Back to Top

aziegler

Member - Posts: 24

Joined: December 21, 2007

Location: Alaska, United States

Posted: December 27, 2007 at 5:40 PM / IP Logged

Do you have the installation or operators manual for the unit? I have never installed a viper, but most of these starters are programmable without a programmer. If you have the manuals or the model number we shoul be able to find some further quidance on the programming options for your unit.

Back to Top

lionhart7756

Member - Posts: 6

Joined: December 26, 2007

Location: Arizona, United States

Posted: December 27, 2007 at 5:41 PM / IP Logged

ok this is no place for he said she said. the question remains can i change the volt / tach setting without a hand held programer?

Back to Top

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: December 27, 2007 at 5:42 PM / IP Logged

...unless programming was locked out by the original installer via the bitwriter....

Back to Top

lionhart7756

Member - Posts: 6

Joined: December 26, 2007

Location: Arizona, United States

Posted: December 27, 2007 at 5:43 PM / IP Logged

how can i tell that i dont think it was locked?

Back to Top

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: December 27, 2007 at 5:45 PM / IP Logged

when you attempt to enter programming the siren will let out one long tone instead of chirping to indicate programming level

Back to Top

speed of sound

Member - Posts: 19

Joined: February 18, 2007

Location: Connecticut, United States

Posted: December 29, 2007 at 11:18 PM / IP Logged

you can go on viper's web site and find a dealer near you. Ask them to program your viper unit with their bit writer and to program tach to the diesel tach wire located on driver side of motor at the PCM. You can always use a 454T tach generator worst case to resolve the problem.

Speed of Sound Technologies

230 pershing Dr

Ansonia, CT 06401

203-954-0066

Back to Top

Search for other posts by speed of sound

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

05 dodge diesel remote start trouble

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.