the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 trailblazer door unlock problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
iammbs 
Member - Posts: 2
Member spacespace
Joined: April 27, 2006
Posted: December 29, 2007 at 2:53 PM / IP Logged  
I am having problems with the doors unlocking on my 2003 Trailblazer. I am using a DEI VALET system with an XK01 bypass kit. The Autostart, and door locking work fine. The UNLOCK problem seems to be associated with the factory security. After pressing Unlock/Disarm on the Valet Autostart/Keyless entry remote, I can't even manually ground the input to the XK01 and unlock the doors.

There seems to be an 8-10 second window of time after disarming the system that the vehicle will not accept the signal. The vehicle even tries to lock the doors again after 8-10 seconds have elapsed since disarming the system.

Here are some details:

With Lock/Unlock wires connected from Valet to XK01

When Locking/Arming system

All Doors Lock

Interior lights turn on for 16 seconds or so

Security Light on Dash turns on for 30 seconds or so

Parking Lights flash once

Windows roll up sometimes. Usually the front 2 windows roll up together, then the driver side rear, then passenger side rear.

Status LED starts flashing

When Unlocking/Disarming

Doors DON'T unlock. The vehicle tries to lock doors 10 seconds after Disarming even though there still locked. The dashboard security light comes on simultaneously when the vehicle tries to lock the doors.

Interior lights come on immediately when disarming

Parking lights flash twice

Status LED stops flashing

With XK01 Unlock wire (Green) disconnected

The doors will still not unlock if I manually ground the Green wire within 8-10 seconds after disarming the system. The vehicle tries to lock the doors after 8-10 seconds even though there still locked.

The doors will unlock if I ground the green wire AFTER the vehicle tries to lock the doors, which is 8-10 seconds after disarming the system

The doors will unlock if I ground the green wire while the system is armed also. Actually, 1 tap to ground unlocks driver door and 2 taps unlocks all doors.

I hope this is enough detail. I really appreciate the help.

Mike

ziadmoh 
Member - Posts: 25
Member spacespace
Joined: February 01, 2004
Location: United States
Posted: December 29, 2007 at 10:21 PM / IP Logged  
First, make sure you have an AMDL firmware downloaded into your XK01.
Then, confirm that XK01 (GRN) is connected to (-) lock wire from RS.
    XK01 (BLU) is connected to (-) Unlock wire from RS.
If non of them worked, contact Bypasskit tech support.
Also, did u go through programing the kit to make sure that it is on MODE1?
Good luck
iammbs 
Member - Posts: 2
Member spacespace
Joined: April 27, 2006
Posted: December 29, 2007 at 11:24 PM / IP Logged  

Yes, I checked to make sure it's in MODE1.  How do I know if the XK01 has the AMDL firmware loaded?

Thanks for the reply.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer