the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 avalanche, hornet 564t and 1700g


Post ReplyPost New Topic
< Prev Topic Next Topic >
mikede 
Member - Posts: 12
Member spacespace
Joined: February 16, 2007
Posted: December 31, 2007 at 3:59 PM / IP Logged  
hood pin is hooked up, the neutral safety switch is run to ground (override), the lights flash once and my remote recieves a signal saying the truck started but then gets another signal saying it stopped. When I do a shutdown diagnostics the LED blinks 3 times saying no RPM or LOW rpm.
mikede 
Member - Posts: 12
Member spacespace
Joined: February 16, 2007
Posted: December 31, 2007 at 6:10 PM / IP Logged  

I couldn't hook up the 1700G domelight monitor input because my truck's wire is negative and the 1700G is looking for positive and I don't have a relay to convert it. Also is this why I can open the door and the alarm doesn't go off? because I need that input on the 1700G?

mikede 
Member - Posts: 12
Member spacespace
Joined: February 16, 2007
Posted: December 31, 2007 at 6:23 PM / IP Logged  

OK I think I found the problem. Since the default setting is "Engine Checking tach" and I didn't connect that wire and didn't allow the 546t to learn the tach its refusing to start. Problem is I can't program it due to the fact I don't have the door inputs setup because I need a relay to swap the negative dome output to a positive so the 1700G will alert the 564t that a door is open.

Sound right?

mikede 
Member - Posts: 12
Member spacespace
Joined: February 16, 2007
Posted: January 01, 2008 at 5:34 PM / IP Logged  

Ok its all working now. It seems the 3rd red wire from the relay pack needs 12v also its not optional like the manual says. I also connect the dome switch and everything seems to be working great.

Thanks for your help.

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 19, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer