2007 328xi, compustar cm4200

Home / the12volt's Install Bay / Car Security and Convenience / 2007 328xi, compustar cm4200 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 03, 2008 at 1:19 PM / IP Logged

Violet is on the switch loom, colours (from memory) are RED / Green and RED / Blue 12V+ power supplies, and light Green ign 1, Violet or Purple acc BUT in this case it's used as ign 2, BLACK/ Blue start. These are the only relevant cables

Back to Top

fdny136

Member - Posts: 30

Joined: December 14, 2003

Location: New York, United States

Posted: January 03, 2008 at 10:31 PM / IP Logged

well turns out its up and running,started fresh today.compustar cn1 harness only gets 12v and ground,cansl2 gets hardwired wired into compustar then bmw int1 gets data linked to compustar the wired to brake switch , key and barrel get wire wrapped for bypass.many thanks to velocity motors pointed me in the right direction after a long day.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2007 328xi, compustar cm4200

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.