crime guard 533i2

i had to install a new battery in my 90 Cherokee and now the remotes dont work for the alarm and i cannot start the jeep.....how do i re-program them???

METHOD #6

Before you begin, your system must be in a disarmed state and you must know where your valet switch is located. If you are unfamiliar with your valet switch, click here. If you know where your valet switch is, perform the following steps:1) Turn the vehicle's ignition "on" then "off".2) Within 7 seconds of step 1, press the valet switch 5 times. The alarm should respond with a long siren chirp.3) Press the valet switch one time to enter transmitter programming mode.4) Press the large/ lock button on your remote. The alarm should respond with a short siren chirp.5) Repeat step 4 for each additional remote that is to operate the system (up to 4 remotes).Note: the system will automatically exit programming mode if it detects a 15 second period of no activity.F.B.S.S air ride is the only way to roll