spacer spacer spacer spacer

1998 Corolla VSS And Tach Locations

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: January 05, 2008
Location: Louisiana, United States
Posted: January 05, 2008 at 5:54 PM / IP Logged  
Instead of trying to connect my Audiovox CCS-100 cruise control VSS and tach wires to my main ECU , which is hard to get to in a 1998 Corolla, I hooked them up to the proper spots on my instrument panel. Consult your a manual for your car. I was also able to get constant 12 volt, switched 12 volt and ground from there. For the brake switch I found the wire that ran to the back which was at the left kick panel instead of trying to tap it off the switch directly.
I hope this info helps others.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Monday, June 24, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer