mars 11 status output?

Home / the12volt's Install Bay / Car Security and Convenience / mars 11 status output? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

stroker@techie

Member - Posts: 33

Joined: January 07, 2008

Posted: January 14, 2008 at 12:09 PM / IP Logged

putting a mars-11 remote start in a 05 pathfinder,07 sante fe,and 06 tucson using 556uw. The 556uw calls for a (-) status input what wire would this be on the mars-11?

Back to Top

Search for other posts by stroker@techie

chriswallace187

Gold - Posts: 1,661

Joined: March 11, 2002

Location: Pennsylvania, United States

Posted: January 14, 2008 at 4:28 PM / IP Logged

Generally on MARS11s I've used the blue 22 gauge ignition wire from the 3-pin plug. The orange anti-grind output may also work; however I can't say with 100% certainty that it's active before the car actually cranks.

C Renner's Auto Electronix

My service is cheap, quick, and good - pick any two

Back to Top

Search for other posts by chriswallace187

customak47

Copper - Posts: 164

Joined: October 25, 2005

Location: Vanuatu

Posted: January 16, 2008 at 3:13 PM / IP Logged

it is the thin gauge ignition 3 negative output you need to use off the mars unit...

My rifle is my friend...

Back to Top

audiomaninc

Copper - Posts: 108

Joined: April 18, 2007

Location: United States

Posted: January 16, 2008 at 3:23 PM / IP Logged

I've always used the thin orange wire in the main harness. This is used for the starter anti grind output and also works well for connecting a bypass. The third ignition wire will also work, but IMO it just adds to the clutter.

-Jason

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mars 11 status output?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.