the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Yukon 2-1/2 component speakers


Post ReplyPost New Topic
< Prev Topic Next Topic >
cadiken 
Member - Posts: 13
Member spacespace
Joined: January 17, 2003
Location: United States
Posted: February 26, 2003 at 2:33 PM / IP Logged  
Does anyone know what the best speakers are to replace the factory 2-1/2" speakers in a 2002 Yukon? There are four speakers - two in the front door and two in the back on the sides of the hatch. I can't find replacement 2-1/2" tweeters so what would be my best option? Thanks
cadiken
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 26, 2003 at 4:46 PM / IP Logged  
You probably won't find 2 1/2" tweeters. What I would do is get a component set ( either 5 1/4" or 6 1/2 " ) and then make a PVCor MDF trim plate & cut out the size of the tweeter from the component set for the OEM tweeters.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
cadiken 
Member - Posts: 13
Member spacespace
Joined: January 17, 2003
Location: United States
Posted: February 26, 2003 at 5:30 PM / IP Logged  
Thanks for the fast reply Jeff. I was thinking I had to do something extreme to get these mounted but your idea is way better. What is the thinnest piece of MDF one can buy? Does it come as thin as door skin?
Cadiken
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 26, 2003 at 5:43 PM / IP Logged  
You can get 1/4" MDF but you don't really need anything thick. Try Masonite particle board, and this comes in thicknesses of under 1/8" . Any type of board will work because the area is so small it will be strong enough to house the tweeters regardless of thickness. You will probably only need 4 peices about 3" x 3" at the max.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
cadiken 
Member - Posts: 13
Member spacespace
Joined: January 17, 2003
Location: United States
Posted: February 27, 2003 at 6:17 PM / IP Logged  
Anyone with this same problem in a Yukon, Tahoe, Suburban, Escalade here is a good fix.
OK; Here is my final solution. I used 1/8" hard wood. I took one of the factory speakers from its casing and traced around it onto the board a few times (6). I then traced the diameter of the new tweeter mount in the middle of the factory speaker template I made. I used a dremel tool with a guide and wood bit to cut the tweeter mount tracing first then the outer template from board. Now I had a piece of wood the exact size and shape of the factory speaker with a hole for the tweeter mount cut out. This was perfect because the factory speaker was held in place by a plastic snap so I was able to use the same mount point for my new Infinity Kappa tweeters. Thanks for the idea Jeff.
Cadiken
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 27, 2003 at 8:20 PM / IP Logged  
No problemo, glad it worked out for you.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 15, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer