the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring diagram for '88 Toyota Supra


Post ReplyPost New Topic
< Prev Topic Next Topic >
kevindanielk 
Member - Posts: 42
Member spacespace
Joined: February 18, 2003
Location: New York, United States
Posted: February 27, 2003 at 4:01 AM / IP Logged  

Can anyone provide me with the wiring diagram for my 1988 Toyota Supra.

I am installing a DEI hornet 553t.

kevindanielk 
Member - Posts: 42
Member spacespace
Joined: February 18, 2003
Location: New York, United States
Posted: February 27, 2003 at 4:25 AM / IP Logged  

I am specifically looking to find the factory ARM wire for the Supra.

It is not included in the wire diagram supplied by THE 12 volt.

Thank you

tsupra 
Member - Posts: 4
Member spacespace
Joined: February 22, 2003
Posted: February 27, 2003 at 3:21 PM / IP Logged  
what is it that you are trying to do with the factory alarm?
kevindanielk 
Member - Posts: 42
Member spacespace
Joined: February 18, 2003
Location: New York, United States
Posted: February 27, 2003 at 6:25 PM / IP Logged  

I am trying to disarm the factory alarm when i remote start the car.

The factory alarn comes on and i have to use my key to disarm it .

seanw 
Member - Posts: 7
Member spacespace
Joined: November 17, 2002
Location: United States
Posted: February 27, 2003 at 7:02 PM / IP Logged  
the oem alarm disarm should be purple / YELLOW (-)in driver side kick panel
sean walsh
tsupra 
Member - Posts: 4
Member spacespace
Joined: February 22, 2003
Posted: February 27, 2003 at 10:22 PM / IP Logged  
or you can open the hood and pop the cover off the hood pin, this is the little black plastic thing at the front right next to the latch. once the cover is off you'll see 2 wires going into the sensor, cut the 2 wires and wire them together. this will cause the alarm computer to think the hood is open which will prevent it from arming. just so you know this has been done by several hundred members of the supra owners group international which is where i learned of it.
kevindanielk 
Member - Posts: 42
Member spacespace
Joined: February 18, 2003
Location: New York, United States
Posted: March 02, 2003 at 5:38 AM / IP Logged  

THANK YOU FOR THE INFO.

seanw and tsupra


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer