the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

07 dodge ram, autostart 2451, xk05


Post ReplyPost New Topic
< Prev Topic Next Topic >
ervie 
Copper - Posts: 68
Copper spacespace
Joined: December 04, 2006
Location: Canada
Posted: January 24, 2008 at 2:40 PM / IP Logged  

im installing a autostart 2451 with an xk05 my problem is that the bypass wont program.

I just found out the owner of the truck has 3 keys, all 3 have the chip and the lock and unlock buttons.

Any way could it be that the truck wont allow the bypass to program because there are 3 keys already.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 24, 2008 at 3:48 PM / IP Logged  
Dod ge vehicles allow 4 keys to program to anyone BCM. Chances are you are not holding the module close enough when your cycling the ignition. Remove the board from the module case so show off the chip and this will allow you to get the chip very close to the ignition column to program.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
ervie 
Copper - Posts: 68
Copper spacespace
Joined: December 04, 2006
Location: Canada
Posted: January 24, 2008 at 4:13 PM / IP Logged  
actually i did that with the same results
ralphtonka 
Member - Posts: 30
Member spacespace
Joined: December 20, 2007
Location: Alberta, Canada
Posted: January 24, 2008 at 4:16 PM / IP Logged  
manual says up to 8 keys, chrysler mods can only me programmed once. try a new mod
ervie 
Copper - Posts: 68
Copper spacespace
Joined: December 04, 2006
Location: Canada
Posted: January 24, 2008 at 4:20 PM / IP Logged  

i tried e mods lol so i finaly used an xk 530 and put in the key and fired right up.

by the way the post says xk05 but its was an xk 532 sry bout that


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer