ads rng c2 idatalink 04 srt 4

Swapped out my Viper 791XVL for a Compustar 2WSS-AS with an Idatalink module ( ADSADCA )software ADS-AL(DL)-CH. Everything went fine alls perfect as far as the Alarm/R-Start. Only thing is I can't get the ADS-RNG-C2 to program. Followed the direction everything goes well until I try to learn the Skim on the C2. Anyone have any luck with programming one of these? The only thing I can think of is that I need to ground the key sense wire as well as jumping the 12V and Ignition.Cris

Noticed the one the coverage chart http://www.idatalink.com/store/index.php?l=product_detail&p=33 my car isn't listed. But on the ADS-AL(DL)-CH install guide, it lists that I need the ADS-RNG-C2.Cris

I'm retarted, I used the wrong RNG. I'll try using the C1 rather then the C2 on Monday.Cris

Used the C1, programmed on the first try.Cris