1996 jetta alarm wiring

Home / the12volt's Install Bay / Car Security and Convenience / 1996 jetta alarm wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 31, 2008 at 8:48 AM / IP Logged

its for a remote starter/alarm

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 31, 2008 at 8:52 AM / IP Logged

hi again, i just ran into a situation, the disarm and arm output from the alarm/starter are the same as unlock and lock (unlock requires a double pulse) if i hook up the arm output and the lock output together and the same for the disarm and unlock output, would i need to use a diode in two of the wires to prevent feedback? they are all (-) outputs from the remote starter.. and the door locks are (=), i will be using a relay.

Is it easier to convert the polarities of the output?

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 31, 2008 at 8:54 AM / IP Logged

**edit "door locks are (+) polarity

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 31, 2008 at 10:11 AM / IP Logged

you will for sure need to convert polarity for your locks.

Back to Top

over_boost

Member - Posts: 16

Joined: January 30, 2008

Location: Alberta, Canada

Posted: January 31, 2008 at 11:16 AM / IP Logged

ok because i'll be using a relay for the lock and unlock wire. but should i also use a diode?

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1996 jetta alarm wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.