first time installing remote start alarm

Home / the12volt's Install Bay / Car Security and Convenience / first time installing remote start alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mikeknerr

Member - Posts: 22

Joined: February 22, 2003

Posted: February 27, 2003 at 7:35 PM / IP Logged

When the car is in park, the neutral saftey switch reads ground.

When the car is in gear should the neutral safety switch register 12 volts?

Two_Cold

Copper - Posts: 91

Joined: July 23, 2002

Location: Canada

Posted: February 27, 2003 at 9:54 PM / IP Logged

Reverse polarity is not common on a neutral safety switch. What kind of car?

mikeknerr

Member - Posts: 22

Joined: February 22, 2003

Posted: February 28, 2003 at 5:57 AM / IP Logged

I was reading the manual and it said that the safety switch would would negative ground when in park or neutral.

I was just curious to know before I started if it would read positive when in gear.

The car is a 1995 Suburban.

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 28, 2003 at 3:55 PM / IP Logged

Just try to start the car in gear, if it doesnt start then dont worry about it. If it does start in gear then worry. Also make sure that you cant take the key out unless the car is in park.

J Rilla

Owner/Installer

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

first time installing remote start alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.