programing compustar remote

Home / the12volt's Install Bay / Car Security and Convenience / programing compustar remote (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 03, 2008 at 3:09 PM / IP Logged

hey guys, i tried programming the compustar 2 way remote and when i turn it off and on 5 times, i always keep getting 2 flashes. Does anyone knoe what the problem is?

Thank you.

Back to Top

derekrobi

Copper - Posts: 52

Joined: December 24, 2007

Location: New Hampshire, United States

Posted: February 03, 2008 at 4:13 PM / IP Logged

2 flashes would indicate programming mode has expired or timed out, have you been able to program any remotes (you said the 2 way remote) - also, what unit, car and bypass are you using.

Back to Top

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 03, 2008 at 4:22 PM / IP Logged

its a 96 Jetta, and its a compustar 2W800FMAS, i have not been able to program any remotes. I read the manual and for 2 flashes it says "KEY ON" but i removed the key after the 5th turn.

Back to Top

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: February 03, 2008 at 7:57 PM / IP Logged

Turn the ignition, on,off,on,off,on,off,on,off,on....leave the igntion on, you should get one parklight flash. Push the 1 button, parklights should flash to confirm programming.

If you have been turning the key off on the fifth turn, then you are cancelling out the programming, that is why you are getting 2 flashes. If this doesn't fix it, you need to check your antenna, or you possibly have a bad tx.

Back to Top

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: February 04, 2008 at 10:04 AM / IP Logged

or you simply have to wrong remote with the wrong antenna.

I think your doing it right but your just not seeing the first flash.

Go by the relays triggering. it's obvious that your doing you see the two flashes. Now you just have to hear for the first one.

"dont ground out!"

Back to Top

derekrobi

Copper - Posts: 52

Joined: December 24, 2007

Location: New Hampshire, United States

Posted: February 05, 2008 at 6:02 PM / IP Logged

Hey TwinTurbo - did you get it working yet?

Back to Top

twin_turbo

Member - Posts: 11

Joined: February 01, 2008

Posted: February 12, 2008 at 7:43 PM / IP Logged

hey guys i got it to work, thanks for the suggestions. I just kept trying and it eventually worked. I think i wasnt turning it "on and off" correctly.

Back to Top

derekrobi

Copper - Posts: 52

Joined: December 24, 2007

Location: New Hampshire, United States

Posted: February 13, 2008 at 5:14 AM / IP Logged

Nice job

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programing compustar remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.