ground dblock

Home / the12volt's Install Bay / Car Audio / ground dblock (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bizzy818

Copper - Posts: 60

Joined: February 26, 2003

Location: United States

Posted: February 28, 2003 at 1:04 PM / IP Logged

when using a ground dblock is it necessary to give a input ground from the floor or somewhere. Or the amp can give the ground from the dblock since its metal. thnx

Big Purds

Silver - Posts: 574

Joined: November 25, 2002

Location: Canada

Posted: February 28, 2003 at 1:11 PM / IP Logged

yes...if you are using a distro block for ground, you should use a good heavy grounding cable (I use 1/0) and make sure you are getting a really clean connection with a good solid grounding point...ie, a bolt in the frame...

you cant pull the ground OUT of the amp to go to a distro block...

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

ground dblock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.