the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 galant remote start issues


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 26, 2008 at 5:14 PM / IP Logged  
Forgive my typos I meant friend and 556U
drawthedj 
Member - Posts: 8
Member spacespace
Joined: February 05, 2008
Posted: February 26, 2008 at 5:54 PM / IP Logged  
howie II,
Help me understand. I should connect the the blue wire from the 556U to the brake wire and/or the black wire??? If I connect the blue wire, wouldn't that show a constant active status to the 556U and then damage it when I push the brake?? Maybe I don't understand what you mean.
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: February 27, 2008 at 10:53 AM / IP Logged  
Blue wire to blue? on main unit which goes to ground when remote start is initiated. Black is a permanent ground.
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: February 27, 2008 at 11:40 AM / IP Logged  

I'll take a stab at helping you.  Check your bypass wiring:  Black to ground, red to 12v constant, blue to blue on the 7-pin harness of the 771 that has the following wire colors on it:  pink/white, yellow, pink, orange, purple, ORANGE / black, blue.  I just want to make sure you have the correct blue wire.  I know you said you remote starting the car with the key in the "on" position, but if the above doesn't work, try starting it with the key in the "off" position to see if it starts correctly.  If it starts, you know you almost definetly have a bypass issue.  Hope this helps some.

drawthedj 
Member - Posts: 8
Member spacespace
Joined: February 05, 2008
Posted: February 27, 2008 at 12:01 PM / IP Logged  

Ok now I understand about the blue wire and all of that. Its all connected correctly (all the bypass wires). I grounded the bypass box while remote starting and it still didn't stay on. So I'm pretty sure its the bypass thats not working. I'll pick up another and try that.

If anyone had any other ideas, please share. Thanks for all your help thus far. I would've gone insane doing this one alone....lol

mikvot 
Gold - Posts: 1,043
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 19, 2006
Location: Missouri, United States
Posted: February 27, 2008 at 6:05 PM / IP Logged  

Does the key you have in the box start the car with no problems?

drawthedj 
Member - Posts: 8
Member spacespace
Joined: February 05, 2008
Posted: February 27, 2008 at 7:53 PM / IP Logged  
Yes it starts without a problem with the spare.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer