power windows

Home / the12volt's Install Bay / Car Security and Convenience / power windows (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dj_lawz

Member - Posts: 20

Joined: February 05, 2008

Posted: February 17, 2008 at 8:12 PM / IP Logged

hey check this out, i installed a power window module to my alarm system, it does work but the windows on my car won't go up all the way or sometimes they don't move at all...... not even with me pushing on the door switch, what do you think the problem could be?

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: February 17, 2008 at 9:12 PM / IP Logged

The one problem I can see, is that we have no idea what kind of vehicle you have, what type of window relay setup you used, and what kind of window module you used.

Back to Top

dj_lawz

Member - Posts: 20

Joined: February 05, 2008

Posted: February 17, 2008 at 9:25 PM / IP Logged

i am an idiot wrote:

The one problem I can see, is that we have no idea what kind of vehicle you have, what type of window relay setup you used, and what kind of window module you used.

ok...

vehicle.........................2000 lincoln town car alarm 5900 viper

windows up (-) armed output all four

windows down (-) channel 6 pulsed at the moment

four window modules one for each window going up and down

this is how i got it wired.........

module...................window switch up/down.......2 wires

^^^^^^^^....................window motor up/down.........2 wires

^^^^^^^^ each window

i don't know if you get this but i don't know how to explain it better...

Back to Top

dj_lawz

Member - Posts: 20

Joined: February 05, 2008

Posted: February 19, 2008 at 9:29 PM / IP Logged

hey maybe my window motors are going bad, or what do you think it might be?

Back to Top

hydroz_23

Copper - Posts: 97

Joined: November 20, 2006

Location: United States

Posted: February 19, 2008 at 10:27 PM / IP Logged

check the dip switches on the window mod, they probably need to be adjusted

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

power windows

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.