autopage 900 lcd, 2006 silverado

Home / the12volt's Install Bay / Car Security and Convenience / autopage 900 lcd, 2006 silverado (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

dstyls

Member - Posts: 37

Joined: January 23, 2008

Posted: February 18, 2008 at 9:26 PM / IP Logged

i'm trying to install a alarm in a 2006 chevrolet silverado LT but i don't understand the yellow and black passlock 2 wire,where does that hook up to your factory alarm?i'm using a auto page 900 lcd,thank's for any help

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 18, 2008 at 9:34 PM / IP Logged

not exactly sure what you're asking, but your autopage doesn't interface directly with the truck's passlock II. you would need a bypass to do remote start. www.bypasskit.com

dstyls

Member - Posts: 37

Joined: January 23, 2008

Posted: February 19, 2008 at 7:13 AM / IP Logged

yeah i'm using the directed dei 1700g gm passlock module,it's this the right module that i suppose to use?if not let me know,thank's for anyone help

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 19, 2008 at 8:54 AM / IP Logged

I believe the 1700 module reads the passlock thru data. So the actual passlock wires on the truck are not needed.

Look at the instructions for install on the unit... it will say. It also does locks.... I think.

hydroz_23

Copper - Posts: 97

Joined: November 20, 2006

Location: United States

Posted: February 19, 2008 at 4:18 PM / IP Logged

the only connection to car will be purple to purple at diagnostic plug and 12v and ground

dstyls

Member - Posts: 37

Joined: January 23, 2008

Posted: February 19, 2008 at 4:49 PM / IP Logged

from wat purple to wat purple,from the 1700g module purple

hydroz_23

Copper - Posts: 97

Joined: November 20, 2006

Location: United States

Posted: February 19, 2008 at 6:17 PM / IP Logged

the purple from 1700g which is your data output. hook that purple wire to the purple wire at your obd2 connector on the bottom left side of your dash. but make sure you hook up all the other wires to the 1700g before connecting data wire to truck

chris27

Member - Posts: 41

Joined: November 19, 2007

Location: Texas, United States

Posted: February 19, 2008 at 6:20 PM / IP Logged

There should be a purple wire on the 1700G. That wire will hook up to the purple wire on the diagnostic plug under the dash. That should take care of your locks and passlock.

hydroz_23

Copper - Posts: 97

Joined: November 20, 2006

Location: United States

Posted: February 20, 2008 at 8:33 AM / IP Logged

thats exactly what i just said

chris27 wrote:

There should be a purple wire on the 1700G. That wire will hook up to the purple wire on the diagnostic plug under the dash. That should take care of your locks and passlock.

dstyls

Member - Posts: 37

Joined: January 23, 2008

Posted: February 21, 2008 at 11:49 AM / IP Logged

the 1700g will light up when plug is plug in right

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.