autopage 655 signal problem

Home / the12volt's Install Bay / Car Security and Convenience / autopage 655 signal problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

MikeHusain

Copper - Posts: 139

Joined: April 10, 2003

Location: Pennsylvania, United States

Posted: February 19, 2008 at 11:55 AM / IP Logged

I just installed an autopage 655 alarm and remote start in a 2005 mazda mpv. Everything works great except that when the car is left parked for a couple of hours, I try to unlock the doors or remote start and I get no response. As soon as I walk up very very close to the vehicle, it then will unlock and remote start. Now right after it receives its first signal, I can be very far away and it works great. It almost seems as if the unit falls asleep after sitting for a while, as soon as it receives its first signal it works perfect. Any suggestions? Thanks....

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: February 19, 2008 at 2:08 PM / IP Logged

check your ground.

MikeHusain

Copper - Posts: 139

Joined: April 10, 2003

Location: Pennsylvania, United States

Posted: February 19, 2008 at 3:04 PM / IP Logged

That was the first thing I did, the second thing was relocated the attenna, third thing was made sure there was sufficient voltage when the vehicle is at rest and i got 12.3 VDC which is not bad.

Jason Ewing

Member - Posts: 3

Joined: May 26, 2004

Location: California, United States

Posted: February 20, 2008 at 12:57 AM / IP Logged

have you tried swapping the antenna yet?

National Product Training Specialist

AUTOPAGE INC

MikeHusain

Copper - Posts: 139

Joined: April 10, 2003

Location: Pennsylvania, United States

Posted: February 20, 2008 at 7:15 AM / IP Logged

No, i did not try that yet, I did try swapping the brain unit thinking there was a defect with it but that did not solve the problem. I will try swapping the attenna next. Any other suggestions..? Thanks..

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

autopage 655 signal problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.