Door locks

Home / the12volt's Install Bay / General Discussion / Door locks (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Ron_toolman

Member - Posts: 32

Joined: March 16, 2002

Location: Canada

Posted: May 29, 2002 at 8:29 PM / IP Logged

Hello,

I just installed a Bulldog Remote starter in a 88Tempo and having problems

getting the locks to work, this is a type C door lock system which requires

extra relay's. When I install then according to the diagram it pop's the fuse.

Is there an easy way to insatll these relay's ?.....seems that I may be hooking them up

to the wrong end of the wires I've cut, they're two pink wires one with a yellow stripe (unlock) and the other

is pink/green (lock), located at the drivers kick panel. Lock = # 86 pulse from remote, # 30 to one side and # 87a

to the other side, # 87 and 85 are connected to 12 volts. The asme for the unlock relay but with a different wire connected to

the # 86 pin on the relay, however this keeps poping the fuse.

Any help would be appreciated.

Thanks Ron.

trusdamanr

Copper - Posts: 116

Joined: May 15, 2002

Location: United States

Posted: May 30, 2002 at 6:34 PM / IP Logged

hey ron the system should come with a 5 pin wire harness module and there should be no need for the relays...... with the 5 pin harness it should look like this.........

GREEN/ black----unlock from the motor

GREEN / WHITE----unlock from the switch cut the pink / YELLOW in between

blue/black---lock from the motor

blue/white---lock from the switch cut the pink/lt.green in between

RED / black gets fused at 12 volts constant

i hope that helps good luck

Ron_toolman

Member - Posts: 32

Joined: March 16, 2002

Location: Canada

Posted: May 31, 2002 at 1:10 AM / IP Logged

Quote: Originally posted by trusdamanr on May 30, 2002
hey ron the system should come with a 5 pin wire harness module and there should be no need for the relays...... with the 5 pin harness it should look like   this.........
GREEN/ black----unlock    from the motor
GREEN / WHITE----unlock   from the switch      cut the pink / YELLOW in between
blue/black---lock from the motor
blue/white---lock   from the switch              cut the pink/lt.green in between
RED / black gets fused at 12 volts constant
i hope that helps good luck

Ron_toolman

Member - Posts: 32

Joined: March 16, 2002

Location: Canada

Posted: May 31, 2002 at 1:13 AM / IP Logged

Thanks, trusdaman

I just revered the wires and the door looks work fine, I had the polarity wrong

but they wok great now, Thanks.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.